Strenx® 600MC D/E
General Product Description
The high-strength structural steel at 600 MPa
Strenx® 600MC D/E is a hot-rolled structural steel made for cold forming, with a minimum yield strength of 600 MPa for stronger and lighter structures. Strenx® 600MC D/E meets or exceeds the requirements of S600MC in EN 10149-2.
Typical applications include a wide range of components and parts, such as demanding load-bearing structures. Strenx® 600MC D/E comes in coils, slit coils or cut-to-length sheets.
Dimension Range
Strenx® 600MC D/E is available in thicknesses of 2.00 – 10.00 mm and widths up to 1600 mm as coils, slit coils or cut to length sheets in lengths up to 16 meters.
Mechanical Properties
|
Thickness
(mm) |
Yield strength ReH 1)
(min MPa) |
Tensile strength Rm
(MPa) |
Elongation A80 2)
(min %) |
Elongation A5 3)
(min %) |
Min. inner bending radius for a 90° bend 4) |
|---|---|---|---|---|---|
|
2.00 – 3.00 |
600 |
650 – 820 |
13 |
16 |
0.7 x t |
|
3.01 – 6.00 |
600 |
650 – 820 |
— |
16 |
1.1 x t |
|
6.01 – 10.00 |
600 |
650 – 820 |
— |
16 |
1.4 x t |
The mechanical properties are tested in the longitudinal direction.
1) If ReH is not applicable then Rp0.2 is used.
2) A80 value applies for thicknesses < 3.00 mm.
3) A5 value applies for thicknesses ≥ 3.00 mm.
4) For both longitudinal and transverse direction.
Impact Properties
|
Product |
Min. impact energy for longitudinal testing,
Charpy V 10×10 mm test specimen 1) |
|---|---|
|
Strenx® 600MC D |
40 J / -20 °C |
|
Strenx® 600MC E |
27 J / -40 °C |
1) Impact testing according to EN ISO 148-1 is performed on thicknesses ≥ 6mm. The specified minimum value corresponds to a full-size specimen.
Chemical Composition (ladle analysis)
|
C
(max %) |
Si
(max %) |
Mn
(max %) |
P
(max %) |
S
(max %) |
Nb
(max %) |
V
(max %) |
Ti
(max %) |
|---|---|---|---|---|---|---|---|
|
0.12 |
0.21 1) |
1.90 |
0.025 |
0.010 |
0.09 2) |
0.20 2) |
0.15 2) |
1) If the material is to be hot-dip galvanized according to category A or category B in EN 10149-2 this must be specified at the time of order.Other galvanizing classes with higher Si-content are available after agreement.
2) Sum of Nb, V and Ti = max 0.22%.
The steel is grain refined.
Carbon Equivalent CET(CEV)
|
Thickness (mm) |
2.00 – 10.00 |
|---|---|
|
Typ CET(CEV) |
0.21 (0.33) |
Our Vision
To establish Sai Steel as a globally recognized, tender-ready manufacturing hub for custom fabrication, industrial components, and engineered structures. Through continuous investment in technology, export infrastructure and partnerships, we aim to lead in quality, precision and service excellence across continents.
Quick Links
Our Products
Get In Touch
Contact No.
+91-93169-17128, +91-79865-05519
Email-Id
saisteel007@gmail.com